FOME Overview
What is FOME
Hardware Running FOME
Currently there is a good amount of hardware options to choose depending on your specific needs. From simple plug and play solutions, to full wire-in universal ECU's. All under the same ecosystem and pretty similar architecture.
How to first setup a board for use
Congratulations. You got yourself FOME capable hardware. Here are some ideal next steps you can follow in order to prepare for your First Start.
Updating the firmware
Updating the firmware is easy to do, however it is important to do it correctly to prevent errors or board
Performing a Safe First Start
Safety Considerations
How to test inputs and outputs
Input tests
Tips and Tricks
Power Cycle the ECU
How to pick a fuel method
The best fuel method for you, will depend on a few factors. Which boil down to, available sensors for load measuring or estimation. (MAP, MAF, TPS). And what does your particular Air Induction setup looks like (Single Throttle Body Naturally Aspirated, Open trumpets ITB, Forced Induction.)
Guide to Tuning the ETB and VVT PIDs
Let's discuss the ETB and VVT PID controls and some give techniques for tuning these loops.
Where to Find Tunes
Tunes and logs uploaded by the community can be found on FOME's tuning portal.